| |
Forwarded from Gary Lin <Gary.Lin@wang<img src=/i/dc.gif border=0 width=35 height=15>>:
Once a rotor warps, even though turning it will make the surface flat,
the vented box structure is still wavy and of varying thickness since
the high spots are cut off; the rotor is not a solid block that will
remain consistent in thickness after machining. This makes the rotor
prone to rewarpage. You should just replace it.
Gary Lin
--
For info on: how to subscribe & unsubscribe, the list's tech/how-to
library, etc. see: http://www.panix.com/~aqn/GTI_VR6/gti_vr6_list/
|
Fri Aug 14 19:17 CDT 1998
>