GTI-VR6

Old Library

The information here is no longer maintained.

Please go to our NEW LIBRARY where we have imported this page and added more.

[GTI-VR6 Library] [GTI-VR6 Mailing List] [Old Library]     
Library List Whole Site

Info: Aftermarket high-flow catalytic converters

Table of Contents
[gti-vr6] Random Technology Jim Chu <jimchu@CompuServe> Thu, 6 Aug 1998 16:17:14 -0400
[gti-vr6] Corrado cat j_baum@earthlink Wed, 14 Apr 1999 20:03:03 -0700



From gti-vr6-owner@dev.tivoli Thu Aug 6 15:36 CDT 1998
From: Jim Chu <jimchu@CompuServe>
To: "INTERNET:gti-vr6@dev.tivoli" <>
Subject: [gti-vr6] Random Technology
Date: Thu, 6 Aug 1998 16:17:14 -0400
  
Their number is 770-978-0264.

Why do you need a cat?  The VR6 cat is very high flowing to start out with.
 Many people who have gone to a test pipe have LOST bottom end power.  I
priced out a custom in/outlet sized cat from them and is around $200~ with
a week of fabrication time.

The factory cat is a 2 1/2" in and 2 1/4" out.

Jim
--
For info on: how to subscribe & unsubscribe, the list's mailing errors,
    list archive, etc.  see:   http://www.panix.com/~aqn/gti_vr6_list/

From gti-vr6-owner@ccsi Wed Apr 14 22:10 CDT 1999
From: j_baum@earthlink
To: gti-vr6@ccsi
Subject: [gti-vr6] Corrado cat
Date: Wed, 14 Apr 1999 20:03:03 -0700
  
> Date: Wed, 14 Apr 1999 16:31:56 -0600
&gt; From: &#109;langenbacher&#64;ceda.calgary.ab.ca
> Subject: [gti-vr6] Corrado cat
>
> I couldn't really find too much info on this.  Anyone that has a Corrado
> catalytic convertor installed please email me privately.  I have some
> questions.


Dynomax makes generic catalytic converters with 2.25", 2.5", and 3"
inlet/outlets.  Screw the high dollar stuff, these are about $120.

JEGS sells them  http://WebStore.JEGs.com/cgi-bin/Jegs1.storefront/

Not affiliated-  JB
--
For info on: how to subscribe & unsubscribe, the list's tech/how-to
    library, etc.  see:   http://www.panix.com/~aqn/GTI_VR6/gti_vr6_list/

©1996-2007 gti-vr6.net -- All Rights Reservered