| |
You def can just remove the lens on the fog lights. Nate can chime in
on this. On the vortex I guy named cullen sells yellow fog lenses
as well as smoked fog lenses. The 2 screws that are used for aiming
must be removed, and then there are two clips holding it in place if
i'm not mistaking. You def will need to heat up the glass a little
bit to remove the sealant of the lens. As far as getting the fog
lights out, it is pretty simple if you have a really small box wrench,
stick it in through the dummy slot, and grip the nut on the back.
then a regular rachet on the front and it will come out. after you
do it the first time and see how it works, its not problem getting
them in and out. I had a short and used to blow a fuse everytime
I used to turn my fogs on and had them off about 10 times atleast.
Hope this helps.
|
>
, fiction@wsu
, list@gti-vr6