| |
For anyone that's been wondering about how to clean in between those seats...I
got bored today and decided to take the seats out and get all that junk out of
there. They come out real easy, 5 minutes for both! 5 mm allen wrench and a
10 mm wrench. Put seat forward, remove plastic stop at end of railing close
to the door. Remove plastic cover close to center console (they both just
snap off). Remove stop bolt with above mentioned tools, slide the seat out.
Don't forget to unplug the wiring clip on drivers side underneath the seat
also.
Clean away...
Unfortunately, a lot harder to get back in...as always. Pay attention how the
center guide comes out by the stop bolt. You have to thread it back through
there while engaging the adjuster handle. Tough with only two hands. Also,
that damn grease seems to get all over the carpet also. If I ever do it
again, I'd lay something down like a towell and yank it out after I'm done.
No more french fry mongrels hiding down there! I should stop trying to eat
and race at the same time.
--
For info on: how to subscribe & unsubscribe, the list's mailing errors,
list archive, etc. see: http://www.panix.com/~aqn/gti_vr6_list/
|
Sun Feb 8 18:53 CST 1998
