Old Library

The information here is no longer maintained.

Please go to our NEW LIBRARY where we have imported this page and added more.

[GTI-VR6 Library] [GTI-VR6 Mailing List] [Old Library]

Info: Clip-on door molding

Table of Contents
Re: [gti-vr6] door moulding	Steven Micherdzinski <s.steelegti@verizon>	Tue, 14 Oct 2003 12:08:56 -0400
Re: [gti-vr6] 3M VHB tape needed	Xinmei Cai <xinmei@gmail>	2004/06/15 Tue PM 04:39:51 EDT
Re: Re: [gti-vr6] 3M VHB tape needed	Steven Micherdzinski <s.steelegti@verizon>	Tue, 15 Jun 2004 17:12:53 -0400

From
From:	Steven Micherdzinski <s.steelegti@verizon>
To:	TLEKA187@aol
Subject:	Re: [gti-vr6] door moulding
Date:	Tue, 14 Oct 2003 12:08:56 -0400
Cc:	list@gti-vr6
	Try Potter. They have most anything. If not, it's off to the stealer you go. I wouldn't worry about the holes. I went the entire winter with no moldings on either door with no problems. Might I also recommend the clip on set. They are genuine VW/Audi parts. Best thing about them is new clip can be purchased at the dealer for $.58 for the outer clips and $.52 for the inner clips. The little rubber grommets are $.27 each. I keep a handful of the clips and grommets around in case one breaks. Peace, Steve Steele 98 GTI-VR6

From
From:	Xinmei Cai <xinmei@gmail>
To:	Mike Pepe <lamune@doki-doki>
Subject:	Re: [gti-vr6] 3M VHB tape needed
Date:	2004/06/15 Tue PM 04:39:51 EDT
Cc:	list@gti-vr6
	[...] How much does the snap-in moulding cost? Xinmei

From
From:	Steven Micherdzinski <s.steelegti@verizon>
To:	Xinmei Cai <xinmei@gmail>, Mike Pepe <lamune@doki-doki>
Subject:	Re: Re: [gti-vr6] 3M VHB tape needed
Date:	Tue, 15 Jun 2004 17:12:53 -0400
Cc:	list@gti-vr6
	For all interested, here's the link... http://www.parts4vws.com/catalog/product_detail.asp?PartNumber=1HM898500NF Peace, Steve Steele 98 GTI-VR6

©1996-2007 gti-vr6.net -- All Rights Reservered